|
| |
mamod spare parts for stationary and mobile model steam engines.
All steam engine spares are shown with a photograph and scale rule to make it
easier for you to establish which Mamod spare parts you need
 |
Standard Mamod spare safety valve
|
| |
|
 |
Standard Mamod whistle assembly
|
| |
|
 |
Standard piston assembly
|
| |
|
 |
Mamod SP4 piston assembly
|
| |
|
 |
Mamod te1a rear wheels
|
| Pair of TE1a rear wheels |
|
 |
SR1, TE1A, SW1 reverse lever
|
| |
|
 |
Mamod Standard flywheel
|
| |
|
 |
selection of washers
|
| |
|
   |
mamod crankshafts
|
| SP2 crankshaft 65mm overall |
|
| SP4 crankshaft 80mm overall |
|
| SR1,TE1A, SW1 crankshaft 100mm overall |
|
 |
SP4 1/2" pulley
|
| |
|
 |
A01 Mamod filler funnel
|
| |
|
   |
Mamod burner tray
|
| Mamod SP2, SP4 burner tray (shown) |
|
| Mamod SA1, FE12,DV2LB1 burner tray |
|
| SR1A, TE1A,SW1 burner tray |
|
 |
Mamod water level plug
|
| |
|
 |
SA1 wheel complete with tyre
|
| |
|
 |
Mamod canopy support wire
|
| |
|
  |
Mamod solid fuel
|
| |
|
 |
Mamod sight glass assembly
|
| |
|
 |
SR1 front rollers (set)
|
| |
|
The drive bands listed below are different lengths depending on the
model. If you are unsure as to which band you require we suggest you use
the unjoined ones, these have a taper on one end which fits into the other
end of the band. Simply cut to the required length.
|
mamod driving bands
|
| WS1 driving bands(4) |
|
| unjoined 12" drive bands (2) |
|
| SR1A, TE1A driving bands (2) |
|
| SW1 driving bands (2) |
|
| SA1 driving bands (2) |
|
 |
mamod coal scuttle
|
| |
|
 |
mamod sr1 front fork assembly
|
| |
|
 |
mamod sp4 flywheel
|
| |
|
 |
SW1 rear wheels (set) |
| |
|
 |
TE1A, SW1 front fork assembly
|
| |
|
|
mamod steering rods
|
| SA1 |
|
| TE1A, SW1 |
|
| SR1A |
|
 |
mamod SR1A rear rollers (set)
|
| |
|
 Suggest
you buy a pack of each as the sizes vary between models |
mamod hub caps
|
| Small (pair) |
|
| large (pair) |
|
 |
teia sw1 mamod front wheels
|
| |
|
| |
|
