|
| |
remote control wind machines
Should be quite obvious what this device does! modern day replacement for the
whoopee cushion. Up to 50' range and through walls. Receiver needs 4 AA
batteries, remote control includes battery.
|
| Remote
Control Dimmer Modules 3 Pack |
Convert
3 mains appliances to remote control dimmer operation |
| |
 |
|
The RMD Series is a range of small modules designed to
work at mains voltage levels, providing a dimming and on/off operation.
Dimmer versions are available part numbers RMD01 and
RMD1X3
On/Off versions are available part numbers RM001 and
RM1X3
|
 |
| • |
Suitable
for incadescant lighting and fans |
| • |
Wire
in modules mean they can be concealed |
| • |
Suitable
for projects and appliance manufacturers |
| • |
Dim
loads up to 150W |
| • |
RF
remote works through walls and ceilings |
| • |
Simple
AC In/Out connections |
| • |
Compatible
with the PC Home Control system RA5605 |
|
| |
Emissions
Compliance |
EN55022:1996 |
| |
Handheld
remote battery |
12V
Alkaline A23 (supplied) |
|
| |
Immunity
Compliance |
IEC
802-1 and EN50082-1 |
|
| |
Site
Code |
8
Bit - 256 Combinations pre-set |
|
| |
Range |
25
metre (open-air), 12-15m average |
|
| |
Frequency |
433.92MHz |
|
| |
Wireless
Transmission |
DTI
Licence Exempt MPT1340 |
|
| |
Maximum
Load |
150W |
|
|
| Remote
Control Convertor 3 Pack |
Control
3 appliances from 1 radio control handset |
| |
 |
|
The RM Series is a range of small modules designed to
work at mains voltage levels switching appliances on and off.
Dimmer versions are available part numbers RMD01 and
RMD1X3
|
|
| • |
Wire
in modules means they can be concealed |
| • |
Switches
any 240V mains supply |
| • |
Suitable
for projects and appliance manufacturers |
| • |
Up
to 5A switching loads |
| • |
Suitable
for flourescant lighting |
| • |
RF
remote works through walls and ceilings |
| • |
Simple
AC In/Out connections |
| • |
Compatible
with the PC Home Control system RA5605 |
|
| |
Emissions
Compliance |
EN55022:1996 |
| |
Handheld
remote battery |
12V
Alkaline A23 (supplied) |
|
| |
Immunity
Compliance |
IEC
802-1 and EN50082-1 |
|
| |
Site
Code |
8
Bit - 256 Combinations pre-set |
|
| |
Range |
25
metre (open-air), 12-15m average |
|
| |
Frequency |
433.92MHz |
|
| |
Wireless
Transmission |
DTI
Licence Exempt MPT1340 |
|
| |
Maximum
Load |
5A
(1200W) |
|
|
| Twin
pack remote controlled halogen exterior lighting |
Using
this pack you can fit two remote controlled halogen lights to the
exterior of your property |
| |
 |
|
Remote control enables you to use the Halogen lights
prior to going out doors or even from your car as you pull into your
driveway.
With a typical range of 25m the remote controls work
from anywhere round your home, and because they use RF technology they
are able to transit through walls and ceilings.
|
|
| • |
Remote
control works through walls and ceilings up to 25 metres away |
| • |
Supplied
with 2 halogen 150W bulbs |
| • |
Durable
water tight enclosures |
| • |
Can
be fitted in under an hour |
| • |
No
unreliable PIR movement detector |
| • |
Handy
remote control can be taken with you |
| • |
Compatible
with the PC Home Control system for timer control |
| • |
Twin
pack offers independent control over each light |
|
| |
Receiver
IP Rating |
IP44 |
| |
Radio
Frequency |
434MHz |
|
| |
Radio
Range |
25m
Clear line of sight (8-12m avg.) |
|
| |
Lamp
rating |
2
x 150W Halogen (Supplied) |
|
| |
Remote
Battery |
A23
(supplied) |
|
|
| Remote
controlled 500W halogen exterior lighting |
This
pack contains all you need to add a remote controlled 500W halogen
light to the exterior of your property. |
| |
 |
|
Remote control enables you to use the Halogen lights
prior to going out doors or even from your car as you pull into your
driveway.
With a typical range of 25m the remote controls work
from anywhere round your home, and because they use RF technology they
are able to transit through walls and ceilings.
|
|
| • |
Handy
remote control can be taken with you |
| • |
Remote
control works through walls and ceilings up to 25 metres away |
| • |
Durable
water tight enclosure |
| • |
500W
Halogen Light |
| • |
Can
be fitted in under an hour |
| • |
No
unreliable PIR movement detector |
| • |
Compatible
with the PC Home Control system for timer control |
|
| |
Receiver
IP Rating |
IP44 |
| |
Radio
Frequency |
434MHz |
|
| |
Radio
Range |
25m
Clear line of sight (8-12m avg.) |
|
| |
Lamp
rating |
1
x 500W Halogen (Supplied) |
|
| |
Remote
Battery |
A23
(supplied) |
|
|
| Remote
controlled 150W halogen exterior lighting |
This
pack contains all you need to add a remote controlled halogen light
to the exterior of your property. |
| |
 |
|
Remote control enables you to use the Halogen lights
prior to going out doors or even from your car as you pull into your
driveway.
With a typical range of 25m the remote controls work
from anywhere round your home, and because they use RF technology they
are able to transit through walls and ceilings.
|
|
| • |
Compatible
with the PC Home Control system for timer control |
| • |
Can
be fitted in under an hour |
| • |
No
unreliable PIR movement detector |
| • |
Handy
remote control can be taken with you |
| • |
Remote
control works through walls and ceilings up to 25 metres away |
| • |
150W
Lighting |
| • |
Durable
water tight enclosure |
|
| |
Receiver
IP Rating |
IP44 |
| |
Radio
Frequency |
434MHz |
|
| |
Radio
Range |
25m
Clear line of sight (8-12m avg.) |
|
| |
Lamp
rating |
1
x 150W Halogen (Supplied) |
|
| |
Remote
Battery |
A23
(supplied) |
|
|
| Remote
Control Dimmer |
Converts
any mains appliance to remote control dimmer operation |
| |
 |
|
The RMD Series is a range of small modules designed to
work at mains voltage levels, providing a dimming and on/off operation
On/Off versions are available part numbers RM001 and
RM1X3
|
|
| • |
Suitable
for lighting and fans |
| • |
Wire
in module means it can be concealed |
| • |
Suitable
for projects and appliance manufacturers |
| • |
Suitable
with loads up to 150W |
| • |
Dimmer
and on/off operation |
| • |
RF
remote works through walls and ceilings |
| • |
Simple
AC In/Out connections |
| • |
Compatible
with the PC Home Control system RA5605 |
|
| |
Emissions
Compliance |
EN55022:1996 |
| |
Handheld
remote battery |
12V
Alkaline A23 (supplied) |
|
| |
Immunity
Compliance |
IEC
802-1 and EN50082-1 |
|
| |
Site
Code |
8
Bit - 256 Combinations pre-set |
|
| |
Range |
25
metre (open-air), 12-15m average |
|
| |
Frequency |
433.92MHz |
|
| |
Wireless
Transmission |
DTI
Licence Exempt MPT1340 |
|
| |
Maximum
Load |
150W |
|
|
| Remote
Control Converter |
Converts
any mains appliance to remote control |
| |
 |
|
The RM Series is a range of small modules designed to
work at mains voltage levels switching appliances on and off.
Dimmer versions are available part numbers RMD01 and
RMD1X3
|
|
| • |
Switches
any 240V mains supply |
| • |
Wire
in module means it can be concealed |
| • |
Suitable
for projects and appliance manufacturers |
| • |
Up
to 5A switching loads |
| • |
Suitable
for flourescant lighting |
| • |
RF
remote works through walls and ceilings |
| • |
Simple
AC In/Out connections |
| • |
Compatible
with the PC Home Control system RA5605 |
|
| |
Emissions
Compliance |
EN55022:1996 |
| |
Handheld
remote battery |
12V
Alkaline A23 (supplied) |
|
| |
Immunity
Compliance |
IEC
802-1 and EN50082-1 |
|
| |
Site
Code |
8
Bit - 256 Combinations pre-set |
|
| |
Range |
25
metre (open-air), 12-15m average |
|
| |
Frequency |
433.92MHz |
|
| |
Wireless
Transmission |
DTI
Licence Exempt MPT1340 |
|
| |
Maximum
Load |
5A
(1200W) |
|
|
| Twin
dimmer lighting adaptor with hand held remote control |
Simply
plug the supplied bayonet adaptors into any 2 light fittings to
provide full remote control dimmer and on/off functions |
| |
 |
|
This is the easiest method of converting your lighting
to dimmer operation, with no wiring.
Please note, the adaptor is not compatible with low
voltage or energy saving (fluorescent) light bulbs.
|
|
| • |
Ideal
for any 2 light fittings in the home or office |
| • |
Hand
held remote control transmits through walls and ceilings |
| • |
No
wiring required |
| • |
Supplied
with pre-fitted batteries |
| • |
Bayonet
adaptors fit to any standard light fitting or desk lamp |
| • |
2
Discreet easily fitted adaptors |
| • |
Converts
lighting to dimmer operation |
|
| |
Battery
(Remote Control)) |
A23
12V |
| |
Suitable
for |
Incandescant
Lighting Only |
|
| |
Fitting |
Standard
Bayonet |
|
| |
Max
Load |
60W
(Ceiling Light), 100W (Desk Lamp) |
|
| |
Site
Code |
8
Bit Factory Preset |
|
| |
Supply
Voltage |
230VAC |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
|
| Twin
lighting adaptor with hand held remote control |
Simply
plug the supplied bayonet adaptors into any 2 light fittings to
provide full remote control on/off functions |
| |
 |
|
The supplied bayonet on/off adaptors easily fit to
standard light fittings. They can then be controlled using the handy RF
remote control - even from another room.
Please note, the adaptors are not compatible with low
voltage or energy saving (flourescent) light bulbs.
|
|
| • |
Ideal
for any 2 light fittings in the home or office |
| • |
Hand
held remote control transmits through walls and ceilings |
| • |
No
wiring required |
| • |
Supplied
with pre-fitted batteries |
| • |
Bayonet
adaptors fit to any standard light fitting or desk lamp |
| • |
2
Discreet easily fitted adaptors |
|
| |
Suitable
for |
Incandescent
+ low energy bulbs |
| |
Fitting |
Standard
Bayonet |
|
| |
Max
Load |
100W
(Ceiling), 150W (Desk Lamp) |
|
| |
Site
Code |
8
Bit Factory Preset |
|
| |
Supply
Voltage |
230VAC |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
| |
Battery
(Remote Control) |
A23
12V |
|
|
| Dimmer
lighting adaptor with wall plate remote controller |
Simply
plug the supplied bayonet adaptor into any light fitting to add
remote control dimmer operation via the supplied wire free wall
plate. |
| |
 |
|
This is the easiest method of converting your lighting
to dimmer operation, with no wiring.
This unit provides an easy way of moving the position of
your wall light switch without any wiring. Using the supplied battery
powered wall plate its simple to move your light switch at any time you
require.
Please note, the adaptor is not compatible with low
voltage or energy saving (flourescent) light bulbs.
|
|
| • |
Ideal
for any light fittings in the home or office |
| • |
Wall
plate transmits through walls and ceilings |
| • |
No
wiring required |
| • |
Supplied
with pre-fitted battery |
| • |
Move
your wall light switch with no wiring or hassle |
| • |
Bayonet
adaptor fits to any standard light fitting or desk lamp |
| • |
Discreet
easily fitted adaptor |
| • |
Converts
your lighting to Dimmer operati |
|
| |
Suitable
for |
Incandescant
Lighting Only |
| |
Fitting |
Standard
Bayonet |
|
| |
Max
Load |
60W
(Ceiling Light), 100W (Desk Lamp) |
|
| |
Site
Code |
8
Bit Factory Preset |
|
| |
Supply
Voltage |
230VAC |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
| |
Battery
(Wall plate) |
A23
12 |
|
|
| Dimmer
lighting adaptor with hand held remote controller |
Simply
plug the supplied bayonet adaptor into any light fitting to provide
full remote control dimmer and on/off function. |
| |
 |
|
The bayonet adaptor can be used to convert ceiling
lighting or desk lamps to remote dimmer operation in a matter of
seconds.
Please note, the adaptor is not compatible with low
voltage or energy saving (flourescent) light bulbs.
|
|
| • |
Ideal
for any light fittings in the home or office |
| • |
Hand
held remote control transmits through walls and ceilings |
| • |
Adds
dimmer function to your lighting |
| • |
No
wiring required |
| • |
Supplied
with pre-fitted battery |
| • |
Bayonet
adaptor fits to any standard light fitting or desk lamp |
| • |
Discreet
easily fitted adaptor |
|
| |
Suitable
for |
Incandescant
Lighting Only |
| |
Fitting |
Standard
Bayonet |
|
| |
Max
Load |
60W
(Ceiling Light), 100W (Desk Lamp) |
|
| |
Site
Code |
8
Bit Factory Preset |
|
| |
Supply
Voltage |
230VAC |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
| |
Battery
(Remote Control) |
A23
12V |
|
|
| Lighting
adaptor with wall plate remote controller |
Simply
plug the supplied bayonet adaptor into any light fitting to add
remote control operation via the supplied wire free wall plate |
| |
 |
|
This unit provides an easy way of moving the position of
your wall light switch without any wiring. Using the supplied battery
powered wall plate its simple to move your light switch at any time you
require.
Please note, the adaptor is not compatible with low
voltage or energy saving (flourescent) light bulbs.
|
|
| • |
Ideal
for any light fittings in the home or office |
| • |
Wall
plate transmits through walls and ceilings |
| • |
No
wiring required |
| • |
Supplied
with pre-fitted battery |
| • |
Move
your wall light switch with no wiring or hassle |
| • |
Bayonet
adaptor fits to any standard light fitting or desk lamp |
| • |
Discreet
easily fitted adaptor |
|
| |
Suitable
for |
Incandescent
+ low energy bulbs |
| |
Fitting |
Standard
Bayonet |
|
| |
Max
Load |
100W
(Ceiling), 150W (Desk Lamp) |
|
| |
Site
Code |
8
Bit Factory Preset |
|
| |
Supply
Voltage |
230VAC |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
| |
Battery
(Remote Control) |
A23
12V |
|
|
| Wireless
Remote 5 Adaptor Set |
This
pack contains all you need to convert 5 household electrical
appliances to remote control. |
| |
 |
|
4 On/off adaptors and 1 dimmer adapor are suplied in the
pack and can be used to control anything from radios to desktop lamps to
heaters and kettles
All the adaptors can be controlled from the comfort of
your arm chair as the remote transmits through walls and ceilings
Compatible with the RA5605 computer remote system
|
|
| • |
Control
up to 5 mains appliances by remote control |
| • |
Supplied
with 2 remote controls |
| • |
Suitable
for just about any mains appliance |
| • |
Remote
works through walls and ceilings |
| • |
Supplied
with pre-fitted battery |
| • |
Supplied
with 1 dimmer adaptor for desk lamps |
| • |
Compatible
with the PC Home Control System |
|
| Remote
Control |
2
X 9 Button Remotes |
|
| |
Max
Load |
13A
On/Off + 150W Dimmer |
|
| |
Fitting |
Standard
3 Pin Socket |
|
| |
Frequency |
433.92MHz |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Site
Code |
8
Bit Factory Preset |
|
|
| PC
Home Control System |
Control
household electrical appliances and lighting from your PC without
any wiring or modification |
| |
 |
|
The Windows compatible software included allows each
appliance to be controlled with the click of an icon or alternatively
you can use the supplied hand held remote control. The software includes
timer functions.
The computer remote system can be used to operate fans,
heaters, air conditioners, televisions, radios, lighting etc. In fact,
just about any household or office electrical appliance.
Expandable using any of the AEI Home Automation range of
products to a maximum of 60 adaptors. Not compatible with continuous
dimmer adaptors (RD001,BFD22,BFD1X2 etc.)
|
|
| • |
Simple
to install. Just plug in the adaptors and operate from the remote
control |
| • |
Additionally
you can control the adaptors from your PC |
| • |
Simple
to program - Just insert the CD and follow the simple instructions |
| • |
Simple
to control - just point and click on the icons with yor mouse |
| • |
Transmits
code through walls and ceilings |
| • |
Expandable
using up to 60 Remote Automation adaptors including mains
adaptors, bayonet fittings and wire in modules |
|
| Controller |
6
Button remote connects to RS232 port |
|
| |
Max
Adaptor Load |
13A |
|
| |
Site
Code |
8
Bit - 256 Combinations |
|
| |
Max
Adaptors |
64
(3 Supplied) |
|
| |
Range |
25m
(free air) - 12-15m Average |
|
| |
Frequency |
433.92MHz |
|
| |
PC
Requirements |
Windows
95/98/ME 32Mb Pentium+ |
|
| |
Software |
Supplied
on CD-ROM |
|
|
| Remote
Controlled Mains Adaptor 3 Pack |
Convert
any 3 mains appliances to remote control operation |
| |
 |
|
The RA103 provides an easy means of upgrading any 3
mains appliances to remote contol operation.
The convenient adaptor units simply plug into any three
pin mains socket without the need for any setting up.
Each set incorporates a handy battery powered remote
control with a pre-fitted battery
|
|
| • |
Convert
any 3 appliances to remote control operation |
| • |
RF
Remote works through walls and ceilings |
| • |
Switches
up to 13 Amps On and Off |
| • |
Battery
lasts up to 3 years |
| • |
Factory
preset code means no interference between sets |
| • |
Suitable
for lamps, fans, electric blankets etc |
| • |
Also
available in single and 5 packs |
| • |
Each
adaptor is independently controlled |
|
| |
Handset
Battery |
Alkaline
A23 (Supplied) |
| |
Frequency |
433.92MHz |
|
| |
Range |
25m
Free Air (12-18m Average) |
|
| |
Supply
Voltage |
230VAC |
|
| |
Max
Switching Current |
13
Amps |
|
|
| Remote
Controlled Mains Adaptor |
Convert
any mains appliance or desk lamp to remote control operation without
wiring or modification |
| |
 |
|
The RA101 provides a convenient means of upgrading any
mains appliance to remote control operation. The convenient adaptor unit
simply plugs into any three pin mains socket without the need for any
wiring or setting up.
Expandable using any of the AEI Home Automation range of
products to a maximum of 60 adaptors. Not compatible with continuous
dimmer adaptors (RD001,BFD22,BFD1X2 etc.)
Each set incorporates a handy remote control with
pre-fitted battery.
|
|
| • |
Convert
any mains appliance to remote control operation |
| • |
RF
Remote control works through walls and ceilings |
| • |
Switches
up to 13 amps on and off |
| • |
Battery
lasts up to 3 years |
| • |
Factory
preset site code means you can operate up to 256 sets independantly
of each other |
| • |
Suitable
for lamps, fans and electrical blankets |
| • |
Also
available in 3 pack (RA103) and 5 pack (RA225) |
| • |
Compatible
with the PC Home Control System |
|
| |
Handset
Battery |
Alkaline
A23 (Supplied) |
| |
Frequency |
433.92MHz |
|
| |
Range |
25m
Free Air (12-18m Average) |
|
| |
Supply
Voltage |
230VAC |
|
| |
Max
Switching Current |
13
Amps |
|
|
| Remote
Controlled Dimmer Adaptor |
Convert
any lamp or fan to remote controlled dimmer operation |
| |
 |
|
The RD001 provides aneasy means of converting any
incandescant light to dimmer operation.
The convenient adaptor units simply plug into any three
pin mains socket without the need for any setting up.
Each set incorporates a handy battery powered remote
control with a pre-fitted battery
|
|
| • |
Convert
any lamp or fan to remote controlled dimmer operation |
| • |
RF
Remote works through walls and ceilings |
| • |
Dims
up to 120W |
| • |
Battery
lasts up to 3 years |
| • |
Factory
preset code means no interference between sets |
| • |
Suitable
for lamps and fans |
| • |
Not
suitable for low voltage lighting |
|
| |
Max
Switching Power |
120
Watts |
| |
Handset
Battery |
Alkaline
A23 (Supplied) |
|
| |
Frequency |
433.92MHz |
|
| |
Range |
25m
Free Air (12-18m Average) |
|
| |
Supply
Voltage |
230VAC |
|
Universal remote control URC22B
 
Works with over 250 different manufacturers!
Operate your TV VCR, cable TV, SAT, CD, HIFI, LD/VCD and other audio products
Elimate the clutter of up to 7 remote controls
Preprogrammed for easy setup (set+TV)+code=ready
Preprogrammed for quick search
| |
|
