hydroponic lighting
equipment
Basic Hydroponic 400 or 600
watt grow light system comprising ballast, shade and son T sodium
bulb. Just plug into the mains.
 
XXXX-y7017
XXXX-y70176
Deluxe version 400 or 600
watt system comprising deluxe ballast, deluxe shade and son T sodium bulb.
Just plug into the mains.
 
XXXX-y7017B
XXXX-y7017b6
Hydroponic grow light
shades
These growlight shades are
available as an economy model or a deluxe.
The economy grow light shade
has a highly reflective mirror surface (supplied covered in blue
protective film) and measures 420x460mm. Supplied with 3m of mains cable the
shade will plug directly into the ballast. Standard screw bulb holder.
 
XXXX-Y7012
Bargain Pack of 4 shades
XXXX-Y7012B
The deluxe shade has a highly
reflective mirror surface (again protected) but has a more robust construction
and a more efficient reflector design. The reflector has a central V section
which prevents heat build up in the bulb and will prolong the life of the bulb.
Measures 420x460mm. Supplied with 3m of mains cable the shade will plug directly
into the ballast. Standard screw bulb holder.
  
XXXX-new7
Ballasts for hydroponic grow
lights
Two types of ballast
available, economy and deluxe.
The economy ballast will run
Sodium or HID bulbs and is available in 250, 400 and 600 watt versions. The case
measures 330x230x170mm and is supplied with a mains cable. In the event of a
bulb failure or removal the ballast is NOT protected and could be damaged.
XXXX-new4
XXXX-new5
XXXX-new6
The deluxe ballast will run
Sodium or HID bulbs and is available in 400 and 600 watt versions. The case
measures 290x170x170mm and is supplied with a mains cable, cable clamp and
rubber feet. In the event of bulb failure the ballast will shut down to prevent
damage.
XXXX-new2
XXXX-new3
Professional quality sodium lamps
available in two sizes and supplied complete with integral ballast and including bulb.
Just connect straight to 240v Ac mains. The units will also run metal halide lamps if
required.
Polished and anodised aluminium reflectors, small overall area (so less sunlight blocked
out) total area 0.055m2
hydroponic light bulbs
LIGHT BULBS
250W SON T
£16.00 XXXX Y723
250W MERCURY £13.60
XXXX Y724
250W PLUG IN MERCURY £23.50 XXXX Y725
250W SON T TWINARC £32.70 XXXX Y726
400W SONT £18.40
XXXX Y727
400W SON T TWINARC £44.00 XXXX Y728
400W SONT PLUS £19.25
XXXX Y729
400W SON T AGRO £32.70
XXXX Y730
400W METAL HALIDE £41.20 XXXX Y731
400W MULTI VAPOUR £41.20 XXXX Y732
400W MERCURY £16.85
XXXX Y733
600W SON T PLUS £30.30
XXXX Y734
600W PLANTA £36.10
XXXX Y735
1000W SON T £59.50
XXXX Y736
1000W MERCURY £45.90
XXXX Y737
Budget Light Fitting
Click on thumbnail to enlarge
Low cost simple light reflector with
an angled mirror finish metal reflector. Fitting measures 230x 370mm and is 90mm deep.
Fitted lead.
Budget light fitting
XXXX Y7012
Complete system comprising Budget fitting, remote ballast and Son T plus 400 watt sodium
lamp
XXXX Y7013
Ballast can be up to 35 metres away from the fitting.
XXXX Y7014
XXXX Y7015
XXXX Y7016
An economy version is also available comprising a budget hood, an economy ballast (only 3
metre range) and Son T plus 400w lamp.
XXXX Y7017
Space Hood
Click on thumbnail to enlarge
Same size as the supernova shade but
with a folded highly polished reflector. .Each fitting measures 440x590 and is 190mm deep.
Supplied with mains lead and hanging points.
Shade only.
XXXX Y801
Complete system comprising Space hood remote ballast and 400 watt Son T plus 400 watt
sodium lamp is £157 XXXX Y802
XXXX Y802
600 watt setup
XXXX Y811
Ballast can be up to 35 metres away from the fitting.
XXXX Y7014
XXXX Y7015
XXXX Y7016
Super Nova Plus
Click on thumbnail to enlarge
Just out is this new reflector, same
design and size as the Supernova but with a mirror like reflector to give even more
efficiency. Also the two panels at the ends of the fitting are made from the same material
(In the Supernova these are finished in white)
Shade only
XXXX Y804
Complete system comprising Supa nova plus, remote ballast and 400 watt Son T plus 400 watt
sodium lamp.
XXXX Y805
600 watt setup.
XXXX Y809
Ballast can be up to 35 metres away from the fitting.
XXXX Y7014
XXXX Y7015
XXXX Y7016
Super Nova Light Fitting
Click on thumbnail to enlarge
Good quality lamp holder with a
double parabolic light reflector made from a highly reflective dimpled surface. The double
parabolic system of reflector is regarded as one of the most efficient means of reflecting
the light from the bulb. Each fitting measures 440x590 and is 190mm deep.
Supplied with mains lead and hanging points.
Shade only
XXXX Y806
Complete system comprising Supa nova, remote ballast and 400 watt Son T plus 400 watt
sodium lamp is
XXXX Y807
600 watt setup is
XXXX Y808
Ballast can be up to 35 metres away from the fitting.
XXXX Y7014
XXXX Y7015
XXXX Y7016
Complete Light Assemblies
Click on thumbnail to enlarge
Supplied complete with reflector,
bulb, case and control gear. Just connect straight to 240v.
High pressure sodium
XXXX Y7008
XXXX Y7009
Metal Halide
XXXX Y7010
XXXX Y7011
Metal halide lamps include a glass safety cover.
Remote Ballast's
Click on thumbnail to enlarge
The Maxibright unit comes in a high
quality heavy duty powder coated metal enclosure. The unit has a steel galvanised metal
base for good earthing and also a lip for wall mounting. All control gear used is C.E.
stamped and is frequency matched and utilises proven technology. The Maxibright unit uses
PULSE control gear which means the lamp can be remoted up to thirty five metres. The
Maxibright unit will run Sodium lamps only. The unit also has a neon indicator to show
on/off and comes with one metre of flex and a thirteen amp fitted plug. 8.The Maxibright
unit also is guaranteed for one year.
XXXX Y7018
XXXX Y7019
Light Rail 3
Click on thumbnail to enlarge
Complete system for moving a light
across your plants giving a much better distribution of light and a more efficient use of
your lights.
System consists of a 6' aluminium track that is mounted on the ceiling and a motorised
unit that runs along the track. From this unit you suspend your light.
The motor is designed to travel the length of the rail in a couple of mins, pause for 30
seconds and then return. Stopping at the other end for 30 seconds and then repeating the
exercise.
This ensures that the light reaches all the plants for the same amount of time. Mains
operated.
Light rail 3 with smart drive
XXXX Y430
| 
